Find Subjects
 Quick      Deep
Find Company

478 subjects are available

honeywell Power Relays - SZR-MY2-1-AC110-120V

P.O.R

Overview:SZR-MY General Purpose Relay: Standard Relay; Plug-in/Solder Terminal; DPDT; 110/120 Vac SZR MY and LY Series general-purpose power relays are designed for a wide range of applications including power as well as logic control for factory machines and control panels.Technical Specifications:Current Rating5 ATerminalSolder/Plug-InResistive Load220 V, 5 ASwitching (Resistive Load)1100 VAContact Rating250 VacRated Current at 50 Hz9.9 mA/10.8 mACoil Resistance4430 ohmsDropout Voltage (% of R...

 05/01/2017  Located :United States

honeywell Key Interlock Switches - GKMA13

P.O.R

Overview: MICRO SWITCH GKM Series Miniature Key Operated Safety Switch, 1NC/1NO Direct Opening, Slow Action, 1 m Side Exit Cable, Plastic Housing, Silver-Nickel Contacts The GKM Series Global Miniature Safety Key Interlock Switch is designed for use on machinery where key removal brings the machine to an immediate safe condition. The GKM Series provides enhanced operator safety when added to hinged or sliding guard doors, screens and protective covers on enclosures. Key sold separately. UL, C...

 05/01/2017  Located :United States

honeywell Key Interlock Switches - GKEA01L

P.O.R

Overview: MICRO SWITCH GKE Series Dual Entry Key-Operated Safety Switch, 1NC/1NO Direct Opening, Snap Action, 1/2 NPT, Plastic, Silver Contacts The GKE Series safety key-operated switch provides superior reliability for safety hard guarding applications in a compact, cost-effective package. The GKE conforms to IEC 60947-5-1 and carries the cULus, CE, CCC, and SIL 3 capable approvals.Technical Specifications: 

 05/01/2017  Located :United States

Key Interlock Switches - GKBA1LX

P.O.R

Overview: MICRO SWITCH GK Series Key Operated Safety Switch, 1NC/1NO Direct Opening, Snap Action, 1/2 NPT, Zinc Die-cast Housing, Silver Contacts The GK Series Dual Entry Key Operated Safety Interlock Switch is designed for use on machinery where key removal brings the machine to an immediate safe condition. It provides enhanced operator safety when added to hinged or sliding guard doors, screens and protective covers on enclosures. Key sold separately.A safety lockout device (GKZL2) is avail...

 05/01/2017  Located :United States

Key Interlock Switches - GKLE36PXA2

P.O.R

Overview: MICRO SWITCH GKR/GKL Series Solenoid Key Operated Safety Switch, 3NC/1NO Direct Opening, Slow Action, 1/2 NPT, 24 Vdc LED, Head on the Left, Zinc Die-cast, Mechanical Latch, Gold-plated Contacts The GKR/GKL Series Dual Entry Solenoid Key Operated Safety Interlock Switch is designed for use on machinery where instant stop and access to the machinery is either impossible (due to the momentum of the machine) or impractical (due to tool or machine damage or scrapped product if the curre...

 05/01/2017  Located :United States

honeywell Cable-Pull Switches - CLSXB4T

P.O.R

Overview: MICRO SWITCH CLSX Series Explosion-proof Cable Pull Safety Switch, 1NC/1NO Direct Opening, Slow Action, Explosion-proof, 1/2 NPT, Silver Contacts The CLSX Series Cable Pull Safety Limit Switch is designed to provide emergency stop protection for conveyor lines in hazardous atmospheres. The CLSX Series withstands the pressure of an internal explosion and cools the exploding gases below the kindling temperature of the explosive atmosphere. Flame paths are provided by the cover housing...

 05/01/2017  Located :United States

honeywell Cable-Pull Switches - 2CPSA1A1

P.O.R

Overview: MICRO SWITCH 2CPS Series Cable Pull Safety Switch, Cable, Maintained Both Sides, 2NC/2NO Direct Opening (Switch 2, Left: 1NC/1NO; Switch 2, Right: 1NC/1NO), 1/2 NPT, Gold-plated Contacts The 2CPS Cable Pull Safety Switch provides readily accessible emergency stop over a long, linear distance. It is a cost-effective means of providing this emergency stop signal compared to multiple emergency stop push buttons. (Cable Pull Safety Switches are not, however, to be used as a means of per...

 05/01/2017  Located :United States

honeywell Cable-Pull Switches - 1CPSA1

P.O.R

Overview: MICRO SWITCH 1CPS Series Cable Pull Safety Switch, Cable, Maintained, 1NC/1NO Direct Opening, 1/2 NPT, Silver Contacts The 1CPS Cable Pull Safety Switch is intended for use in applications with the cable runs up to 76 m [250 ft], such as conveyor runs within defined system zones. It is a cost-effective means of providing this emergency stop signal compared to multiple emergency stop push buttons. (Cable Pull Safety Switches are not, however, to be used as a means of personnel safegu...

 05/01/2017  Located :United States

honeywell relays - SZR-LY2-1-AC110-120V

P.O.R

Overview: SZR-LY General Purpose Relay: Standard Relay; Plug-in/Solder Terminal; DPDT; 110/120 Vac SZR MY and LY Series general-purpose power relays are designed for a wide range of applications including power as well as logic control for factory machines and control panels. 

 05/01/2017  Located :United States

honeywell switches - FFS-11-03

P.O.R

Overview: Honeywell FF Series Safety Switch and Actuator, 1NC/1NO, dc, 3 m pre-wired Honeywell FFS switches are designed to be tamper-proof, standalone safety switches that can often be used to switch relays, contacts, or safety relays directly. By removing the separate control unit, Honeywell has made it possible to use its electronic switching technology in smaller, simpler safety systems. The FFS is often suitable for use on its own, for lower category safety systems, providing two volt-fr...

 05/01/2017  Located :United States

switches - FF6-10-AC-03

P.O.R

Overview: Honeywell FF Series Safety Switch and Actuator, red ABS, 1NC safety, ac, 3 m pre-wired Honeywell FF6 switches are magnetically operated, non-contact safety switches designed for use in many machine guarding applications. The FF6 is available in both ABS and 316 grade stainless steel. The switch and actuator are fully sealed to IP67 and can often be used in wet or dusty environments. With the correct installation, FF6 safety switches comply with the guidelines given in EN1088.Technic...

 05/01/2017  Located :United States

honeywell switches - FF5-21-DC-03

P.O.R

Overview: Honeywell FF Series Safety Switch and Actuator, red ABS, 2NC/1NO, dc, 3 m pre-wired Honeywell FF5 switches are magnetically operated, non-contact safety switches designed for use in many machine-guarding applications. The FF5 is available in both ABS and 316 grade stainless steel and is capable of switching up to 300 mA at 24 Vdc. The switch and actuator are fully sealed and can often be used in wet or dusty environments. With correct installation, the FF5 safety switches comply wit...

 05/01/2017  Located :United States

honeywell SWITCHES - FF3-20-AC

P.O.R

Overview: Honeywell FF Series Safety Switch, 30 mm [1.18 in], 2NC, ac, 3 m pre-wired The FF3 is an 30 mm barrel (thread) mounting, magnetically actuated safety switch with up to two safety contacts and one indicator contact. The barrel, thread, mount design is easy to install to the frame of a machine guard and allows for flush mounting, reducing potential switch damage and space constraint issues. Sealed to IP67 enabling use in most harsh environments.Technical Specifications: 

 05/01/2017  Located :United States

honeywell switches - FF2-10-AC

P.O.R

Overview: Honeywell FF Series Safety Switch, 18 mm [0.70 in], 1NC, ac, 3 m pre-wired The FF2 is an 18 mm barrel (thread) mounting, magnetically actuated safety switch with one safety contact and an optional indicator contact, if required. The barrel, thread, mount design is easy to install to the frame of a machine guard and allows for flush mounting, reducing potential switch damage and space constraint issues. Sealed to IP67 enabling use in most harsh environments.Technical Specifications:&...

 05/01/2017  Located :United States

honeywell switches - GKNA21

P.O.R

Overview: MICRO SWITCH GKN Series Key-Operated Safety Switch, 2NC/1NO Direct Opening, Slow Action, NPT Conduit, Plastic Housing, Silver ContactsThe GKN Series safety interlock switches provide superior reliability in a compact, cost-effective package size. Six different types of actuator keys are available.The GKN Series conforms to IEC 60947-5-1 and carries cULus, CE, CCC, and SIL 3 capable approvals. 

 05/01/2017  Located :United States

MICRO SWITCH TL Series Toggle Switch

P.O.R

 

 04/01/2017  Located :United Arab Emirates

Toggle SwitchesNT Series11NT1-1A-Honeywell

P.O.R

 

 04/01/2017  Located :United States

Toggle SwitchesMT Series1MT1-1-Honeywell

P.O.R

 

 04/01/2017  Located :United States

Toggle SwitchesTW Series111TW1-1-Honeywell

P.O.R

 

 04/01/2017  Located :United States

Toggle SwitchesTS Series11TS115-1-Honeywell

P.O.R

 

 04/01/2017  Located :United States