Find Subjects
 Quick      Deep
Find Company

527 subjects are available

ISMAT - Bush Coupling

P.O.R

 

 15/01/2017  Located :United Arab Emirates

Deep Groove ball bearing-Alkhalij Enterprises

P.O.R

Timken deep groove ball bearings deliver reliable performance in a wide range of applications and conditions, featuring super-finished raceways and controlled internal geometries to ensure quiet operation.Our portfolio includes metric standard, miniature and thinsection deep groove ball bearings that span 3 mm to 150 mm bore sizes. They can be supplied with various sealing options and internal clearances.Readily available with the support of distribution and shipping cen...

 02/01/2017  Located :United Arab Emirates

Radial Spherical Plain Bearings with Lip Seals

P.O.R

This series of plain bearings is similar to the SF and FS types, but also includes lip seals that are retained in the outer ring and withstand high grease pressures during lubrication. These lip seals assure full distribution of the lubricant to all bearing surfaces and protect against internal contamination.  While all of our plain bearings are precision ground and made from through-hardened steel, custom orders are available and can include special materials, clearances, surface fini...

 02/01/2017  Located :United Arab Emirates

N (RIN, RN) Roller bearings-Alkhalij Enterprises

P.O.R

These bearings carry radial load only and can accommodate both expansion and contraction. The relative axial displacement of one ring to the other occurs with minimum friction while the bearing is rotating. Type N bearings may be used in one or two positions for shaft support if other means of axial location are provided. The outer ring has a cylindrical bore without ribs and the inner ring incorporates two ribs. Size range: 80 mm to 2000 mm OD

 02/01/2017  Located :United Arab Emirates

NU (RIU, RU)

P.O.R

These bearings carry radial load only and can accommodate both expansion and contraction. The relative axial displacement of one ring to the other occurs with minimum friction while the bearing is rotating. Type RIU and RU bearings may be used in one or two positions for shaft support if other means of axial location are provided. The outer ring has two integral ribs while the inner ring has a cylindrical outer diameter without ribs.Size range: 80 mm to 2000 mm OD

 02/01/2017  Located :United Arab Emirates

QD Bushings

P.O.R

Standard, Metric Tapered and fully split through bore bushings are built according to MPTA (Mechanical Power Transmission Association) Industry Standards to insure the proper design, manufacture, and application. 

 02/01/2017  Located :United States

Concentric Locking Collar

P.O.R

These housed units are selected where setscrew locking is preferred, but inner- ring stress and/or distortion are of major concern. They are frequently used in limited-space applications and where reversing shaft rotation is encountered.Bearings are locked onto the shaft by two set screws, 120 degrees apart, tightened in the collar and passing through drilled holes in the inner ring.

 02/01/2017  Located :United States

Radical Spherical Plain Bearings

P.O.R

Timken’s spherical plain bearings (SPBs), or bushings, are metal-on-metal bearings consisting of a spherically ground inner ring housed in a mating outer ring without any rolling elements.  While all plain bearings are precision ground and made from through-hardened steel, custom orders are available and can include special materials, clearances, surface finishes or configurations to accommodate unique applications.Size range: Available from 12.7 mm – 600 mm (0.500 in. to 23.622...

 02/01/2017  Located :United States

Cylindrical Roller

P.O.R

All cylindrical roller bearing configurations (except RAA) provide precision control of the rollers for operation over a wide range of speeds with precision-ground, double-ribbed guide flanges on one ring. These roller bearings are found in turbine engine mainshaft, transmission and gearbox applications with high radial loads.Size range: 22 mm to 300 mm OD (special designs up to 600 mm are available)

 02/01/2017  Located :United States

Miniature

P.O.R

​Timken® miniature bearings, available in both inch and metric sizes, meet virtually all precision requirements including radial retainer, pivot, thrust, high-speed radial, angular contact and full ball complement.A wide variety of bearing types and design variations are available to meet the requirements of virtually all precision instrument applications. Bearing types include radial retainer, pivot, thrust, high speed radial, angular contact and full ball complement. Many selections also...

 02/01/2017  Located :United Arab Emirates

Ball

P.O.R

Timken’s ball bearings for aerospace applications are specifically designed to withstand radial, thrust, moment, reversible thrust or combination loads. Our offering includes two Conrad configurations (types HK and HD) and two angular contact configurations (types HA and HT). Bearings may be supplied as single units or in preloaded sets.Size range: 10mm to 600 mm OD

 02/01/2017  Located :United Arab Emirates

Angular Contact Ball

P.O.R

Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.Single-row: 10 mm – 150 mm (0.3937 in. – 5.9055 in.) bore Double-row: 12 mm – 150 mm (0.4724 in. – 5.9055 in.) boreAngular con...

 02/01/2017  Located :United Arab Emirates

Angular Contact

P.O.R

Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.Angular contact ball bearings are engineered for use in high-speed, high precision applications for:

 02/01/2017  Located :United Arab Emirates

Precision

P.O.R

Precision ball bearings are used for high precision applications in a variety of markets, including aerospace, health, machine tool, robotics and general industry.Super precision bearings manufactured to MM/MMV tolerances combine the accuracy and performance of ABEC 9/ISO P2 with the non-critical features of ABEC 7/ISO P4 levels for cost effectiveness.Type MMX super precision bearings are made to ABEC 9/ISO P2 levels and have closer tolerances and running accuracies than ABEC 7/ISO P4 ...

 02/01/2017  Located :United Arab Emirates

Thrust ball bearings

P.O.R

SKF thrust ball bearings are manufactured as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.SKF thrust ball bearings are separable, i.e. the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted separately.

 31/12/2016  Located :United Arab Emirates

Y-bearing flanged units

P.O.R

SKF Y-bearing flanged units are available as standard in a wide variety of designs (fig. 1) and can incorporate most of the bearings provided in the section Y-bearings.

 31/12/2016  Located :United Arab Emirates

Y-bearing plummer block units

P.O.R

SKF Y-bearing plummer (pillow) block units are available as standard in a wide variety of designs  and can incorporate most of the bearings provided in the section Y-bearings. 

 31/12/2016  Located :United Arab Emirates

Thrust ball bearings

P.O.R

SKF supplies standard thrust ball bearings  in various dimension series for shaft diameters ranging from 10 to 45 mm. Thrust ball bearings consist of polymer washers and a full complement ball set. The ball set per bearing consists of two different ball materials to reduce friction and frictional heat. Balls made of the selected material are fitted alternately with balls made of the same polymer as the washers.

 31/12/2016  Located :United Arab Emirates

Single row deep groove ball bearings

P.O.R

SKF supplies standard single row deep groove ball bearings (fig. 1) in various dimension series for shaft diameters ranging from 3 to 60 mm. They consist of:

 31/12/2016  Located :United Arab Emirates

Support bearings units for roller screws - SKF

P.O.R

SKF offers a full range of support bearings units  to be fitted on the machined ends of the planetary and recirculating roller screws. These support bearings incorporate high performance SKF ball bearings, plus efficient sealing solutions providing a long service life to the complete roller screw assembly.  The FLRBU support bearings can also be used for ball screw applications, if the standard support bearings designed for ball screws (FLBU, PLBU and BUF types) not cover the load r...

 29/12/2016  Located :United Arab Emirates